High water bill due to a hidden leak
SoonAnywhere behind the meter
Your water meter is the fastest way to confirm a hidden leak. The EPA's WaterSense program says to check the meter before and after a two-hour period when no water is used. "If the meter does not read exactly the same, you probably have a leak."
Turn off all water use. Taps, toilets, irrigation, washer, dishwasher and ice maker.
Find your meter. It is usually in a box near the street or sidewalk.
Write down the reading. Note the leak indicator too, if your meter has one.
Wait two hours without using any water.
Read it again. If the number moved, water is leaving the pipes somewhere.
The EPA says the average household's leaks can waste nearly 10,000 gallons of water a year.
The meter is the dividing line. The City of Clovis handles leaks on city mains and on the service line up to the meter. The City states: "Leaks which are located behind the water meter are the customer's responsibility to repair."
Tarpey Village is also served by City of Clovis water. Call the City to confirm before work on the meter side.
A hidden leak usually shows up first on your water bill or your meter, long before you see water. These signs usually mean it's time for water leak detection in Clovis, CA.
Anywhere behind the meter
Supply lines, slab or yard line
Hot water line under the slab
Supply line inside a wall
Pipe or fixture above
Main water line between meter and house
An unexplained increase in your water bill is worth checking even if you see nothing wet.
A slab leak is a water leak under the concrete slab your house sits on. In a home built on a slab, the water lines run beneath the floor where you can't see them.
Not every hidden leak is under the slab. These three are the other common places a leak hides.
Non-invasive leak detection means finding the leak with tools before opening any wall or floor. The plumber picks the method based on where the signs point.
We find the leak and repair the pipe. We don't dry out or rebuild what the water damaged.
If the leak has soaked flooring or drywall, a restoration company handles the drying after we fix the pipe.
Call (559) 418-4780. Tell us what you've noticed: a bill, a sound, a warm floor or a wet spot.
Confirm the leak. The plumber checks the meter and isolates the lines.
Locate it. The leak is narrowed to one spot before anything is opened.
Agree on the repair. You get a written scope and the cost before work starts.
Repair and re-test. The pipe is fixed, then pressure-tested and the meter checked again.
Arrival time depends on where you are in Clovis, traffic and the jobs already underway. You'll get a realistic time when you call.
A good leak detection company in Clovis, CA shows you where the leak is before opening anything. Look for these:
There is no fixed price for leak detection or leak repair. Cost is set after the job is assessed. It depends on:
If a leak damaged your home, we can provide photos, the leak location, the cause we found and a record of the repair. You can submit these documents to your insurance company to request compensation. Whether a loss is covered is between you and your insurer. We don't make coverage decisions or promise any outcome.
We find and fix hidden leaks across Clovis and Tarpey Village. Pick your area for local water and sewer details.