Sump pump not working
Call now if water is risingNo power, a tripped breaker, a stuck float or a burned-out motor
A failing sump pump usually changes how it sounds or how often it runs before it stops. Here is what each sign tends to mean.
No power, a tripped breaker, a stuck float or a burned-out motor
A stuck float switch, a failed check valve or a pump too small for the inflow
Worn motor bearings, debris in the impeller or a slamming check valve
A clogged intake or a blocked discharge line
Float set wrong, or water flowing back from the discharge line
Stay out of standing water near the pit if any cords or outlets are close by.
Check the outlet and breaker from a dry spot. A tripped GFCI outlet is a common cause.
Look at the float. If it's stuck against the pit wall, the pump won't start.
Call (559) 418-4780 if water keeps rising or the pump still won't run.
The easiest way to know your pump will work is to make it work. Do this before the rainy season and after any power outage.
Check the power. Make sure the pump is plugged in and the outlet works.
Pour water into the pit slowly from a bucket until the float rises.
Watch it switch on. The pump should start on its own once the float lifts.
Watch the water drop. The pit should empty and the pump should shut off.
Check outside. Water should flow out of the discharge pipe, away from the house.
Our sump pump service in Clovis covers the pump, the switch and the pipe that carries water away.
A submersible pump sits under the water in the pit. A pedestal pump stands above the pit with its motor out of the water. Both work; the pit and the water flow decide which fits.
A battery backup keeps water moving when the power is out, including during storms. It's a second pump with its own battery and float, sitting beside the main pump.
Call (559) 418-4780. Tell us what the pump is doing and whether water is rising.
Diagnose. The plumber checks power, the float, the check valve and the discharge line.
Repair or replace. You get the cost before work starts, then the fix is made.
Bucket test. The pit is filled to prove the pump starts, empties it and shuts off.
Arrival time depends on where you are in Clovis, traffic and the jobs already underway. You'll get a realistic time when you call.
We handle the pump and the plumbing that carries water away. We don't dry out the space or fix why water is getting in.
A good plumber proves the pump works before leaving. Look for these:
There is no fixed price for sump pump installation or repair. Cost is set after the job is assessed. It depends on:
If a failed sump pump let water into your home, we can provide photos, the cause we found and a record of the repair. You can submit these documents to your insurance company to request compensation. Whether a loss is covered is between you and your insurer. We don't make coverage decisions or promise any outcome.
We repair and install sump pumps across Clovis and Tarpey Village. Pick your area for local details.