Main sewer line backup
Call nowSewage comes up in a tub, shower or floor drain.
The homeowner is. Clovis Municipal Code Chapter 6.4 states: "Sewer service laterals shall be installed, maintained, and repaired by the owner of the property which the lateral serves."
The code makes the owner responsible for the whole lateral, from the building connection to the wye where it joins the city main. That means a root clog, crack or sag anywhere along that pipe is the owner's to repair.
If a camera inspection shows the problem is in the city main itself, call the City of Clovis Public Utilities department at (559) 324-2600. Tarpey Village is outside city limits, so check with your sewer provider first.
This is general information, not legal advice.
The clearest sign of a sewer line problem is more than one drain backing up at the same time. A single slow sink is usually a local clog; several fixtures failing together point to the main line.
Sewage comes up in a tub, shower or floor drain.
A sewer line blockage, or damage, in the main line.
Air is pushing past a blockage in the lateral.
A crack or break is letting sewer gas out.
Wastewater is leaking into the soil above a break.
Roots, a sag or a broken joint keep catching waste.
Stop all water use. No flushing, showers, laundry or dishwasher.
Keep people and pets away from sewage. It carries germs.
Leave the outdoor cleanout cap closed if sewage is backed up. Pressure behind it can spray waste when the cap comes off.
Call (559) 418-4780 for sewer backup repair, day or night.
Most sewer line damage comes from roots, age or ground movement. Each one needs a different fix, which is why the camera comes first.
Roots find small gaps at pipe joints and grow inside. Tree roots in sewer line repair usually means cutting the roots out, then sealing or replacing the joint so they don't return.
Broken sewer line repair starts with finding the break on camera. Older clay and cast iron pipes crack with age. Cracked sewer pipe repair can be a spot fix if the rest of the line is sound.
A low spot, or belly, forms when the soil under the pipe settles. Water and waste sit there and clog the line again and again. Sagging sewer line repair means re-grading that section.
A pipe that has collapsed blocks the line completely. Collapsed sewer line repair needs that section replaced.
Homes in areas like Old Town Clovis are more likely to have older pipe materials and mature trees near the line.
A sewer camera inspection shows exactly what is wrong and where, so the repair is sized to the problem. A sewer pipe camera on a cable goes in through the cleanout and records the inside of the line.
Our sewer repair services in Clovis, CA depend on what the camera finds. Some lines need one fixed section; others need the whole line replaced.
We repair and replace the sewer pipe. We don't clean up after a backup or restore the yard and hardscape above the line.
Call (559) 418-4780. Tell us which drains are backing up and how often.
Clear and inspect. The line is cleared enough to run a camera through it.
Show you the footage. You see the problem, where it is and how deep.
Agree on the repair. You get a written scope and the cost before any digging.
Repair and re-check. The line is fixed, then filmed again to confirm it flows.
Arrival time depends on where you are in Clovis, traffic and the jobs already underway. You'll get a realistic time when you call.
A good sewer repair company in Clovis, CA shows you the problem on camera before recommending a repair. Look for these:
There is no fixed price for sewer line repair or replacement. Cost is set after the job is assessed. It depends on:
If a sewer backup damaged your home, we can provide photos, camera footage, the cause we found and a record of the repair. You can submit these documents to your insurance company to request compensation. Whether a loss is covered is between you and your insurer. We don't make coverage decisions or promise any outcome.
We repair sewer lines across Clovis and Tarpey Village. Pick your area for local water and sewer details.